Peer-reviewed journals
Shishkovsky I., Scherbakov V., Kuznetsov M., Belousova O., Morozov Y. 4D Laser Printing of Functionally Graded Structures and Items from Mixtures of Powdered Polymers with Functional Micro- and Nanoparticles: An Autoreview. // International Journal of Self-Propagating High-Temperature Synthesis, 2020, Vol. 29, No. 2, pp. 77–86. doi:10.3103/S1061386220020132
Shishkovsky I., Kakovkina N., Scherbakof V. Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating. // Procedia CIRP, 2020, 94: 217-221, 2020.
S. Belov, S. Nikolaev, I. Uzhinsky. Hybrid Data-Driven and Physics-Based Modeling for Gas Turbine Prescriptive Analytics. Int. J. Turbomach. Propuls. Power 2020. https://doi.org/10.3390/ijtpp5040029
B. Vasilyev, S. Nikolaev, M. Raevskiy, S. Belov, I. Uzhinsky. Residual Life Prediction of Gas-Engine Turbine Blades Based on Damage Surrogate-Assisted Modeling. Appl. Sci. 2020, 10, 8541. DOI: 10.3390/app10238541
J. Bondareva, S. Evlashin, and O. Lukin, Sulfonimide-Based Dendrimers: Progress in Synthesis, Characterization, and Potential Applications, Polymers (Basel). 12, 1 (2020). https://doi.org/10.3390/polym12122987
J. Bondareva, T. Aslyamov, A. Kvashnin, P. Dyakonov, Y. Kuzminova, Y. Mankelevich, E. Voronina, S. Dagesyan, A. Egorov, R. Khmelnitsky, M. Tarkhov, N. Suetin, I. Akhatov, and S. Evlashin. Environmentally Friendly Method of Silicon Recycling: Synthesis of Silica Nanoparticles in an Aqueous Solution, ACS Sustain. Chem. Eng. 8, (2020). DOI: 10.1021/acssuschemeng.0c03783.
M. Filimonov, O. Rogozin, D. Firsov, Y. Kuzminova, S. Sergeev, A. Zhilyaev, M. Lerner, N.Toropkov, A. Simonov, I. Binkov, I. Okulov, I. Akhatov, and S. Evlashin. Hardening of Additive Manufactured 316l Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction. Materials (Basel). 14, 1 (2020). DOI: 10.3390/ma14010115
S. Chugunov, N.A. Adams, I. Akhatov. Evolution of SLA-Based Al2O3 Microstructure During Additive Manufacturing Process. Materials. MDPI, 13, pp. 3928, 2020, doi:10.3390/ma13183928
A.X.H.Yong, A.Aktas, D.May, A.Endruweit, S.Lomov, S.Advani, P.Hubert, S.Abaimov, D.Abliz, I.Akhatov, M.Ali, S.Allaoui, T.Allen, D.Berg, S.Bickerton, B.Caglar, P.Causse, A.Chiminelli, H.Wang. Experimental characterisation of textile compaction response: A benchmark exercise. Composites Part A: Applied Science and Manufacturing. 2020; https://doi.org/10.1016/j.compositesa.2020.106243
Maltsev E.A., Maglinets Yu.A., Brezhnev R.V. Calculation technique of satellite imaging quality assessment criterion based on geometrical concentration calculation. Sovremennye problemy distantsionnogo zondirovaniya Zemli iz kosmosa. 2020; DOI: 10.21046/2070-7401-2020-17-5-35-44
Wamriew D.S., Charara M., & Maltsev E. Deep Neural Network for Real-Time Location and Moment Tensor Inversion of Borehole Microseismic Events Induced by Hydraulic Fracturing. Society of Petroleum Engineers. 2020; https://doi.org/10.2118/201925-MS
Safonov A, Maltsev E, Chugunov S, Tikhonov A, Konev S, Evlashin S, Popov D, Pasko A, Akhatov I. Design and Fabrication of Complex-Shaped Ceramic Bone Implants via 3D Printing Based on Laser Stereolithography. Applied Sciences. 2020; 10(20):7138. https://doi.org/10.3390/app10207138
K. Makarenko, O. Dubinin, P. Shornikov, I. Shishkovsky. (2020). Specific aspects of the transitional layer forming in the aluminium bronze – stainless steel functionally graded structures after laser metal deposition. Procedia CIRP, https://doi.org/10.1016/j.procir.2020.09.143
K. Makarenko, I.Shishkovsky, O. Dubinin (2020). Analytical Evaluation of the Dendritic Structure Parameters and Crystallization Rate of the Laser Deposited Fe-Cu Functionally Graded Materials. Materials. https://doi.org/10.3390/ma13245665
Popov, D., Maltsev, E., Fryazinov, O., Pasko, A., & Akhatov, I. (2020). Efficient contouring of functionally represented objects for additive manufacturing. Computer-Aided Design, 102917. doi:https://doi.org/10.1016/j.cad.2020.102917.
D.G. Firsov, S.D. Konev, O.N. Dubinin, S.A. Evlashin, and I.V. Shishkovsky. Localization of Deformation in Lattice Structures of 3D-Printed Samples of 03X17H14M2 Steel. // Technical Physics Letters, 2020, Vol. 46, No. 7, pp. 683–686. doi: 10.1134/S1063785020070160
K. Mohammadi, M. Movahhedy, I. Shishkovsky, R. Hedayati. Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique. // Applied Physics Letters, 117, 000000 (2020); doi: 10.1063/5.0014167// ArXiv preprint (17 May 2020) arXiv:2005.08360
B. Voloskov, S. Evlashin, S. Dagesyan, S. Abaimov, I.S. Akhatov, I. Sergeichev. Very High Cycle Fatigue Behavior of Additively Manufactured 316L Stainless Steel (2020). https://doi.org/10.3390/ma13153293
A. R. Kasimov and A. R. Gonchar. Reactive Burgers model for detonation propagation in a non-uniform medium, Proceedings of the Combustion Institute. (2020) https://doi.org/10.1016/j.proci.2020.07.149
Fedulov, B.N., Fedorenko, A.N. Residual strength estimation of a laminated composite with barely visible impact damage based on topology optimization. Struct Multidisc Optim 62, 815–833 (2020). https://doi.org/10.1007/s00158-020-02538-y
Evlashin, S. A., Fedorov, F. S., Dyakonov, P. V., Maksimov, Y. M., Pilevsky, A. A., Maslakov, K. I., Kuzminova, Y. O., Mankelevich, Y. A., Voronina, E. N., Dagesyan, S. A., Pletneva, V. A., Pavlov, A. A., Tarkhov, M. A., Trofimov, I. V., Zhdanov, V. L., Suetin, N. V., & Akhatov, I. S. (2020). Role of Nitrogen and Oxygen in Capacitance Formation of Carbon Nanowalls. The Journal of Physical Chemistry Letters, 11(12), 4859–4865. https://doi.org/10.1021/acs.jpclett.0c01274
VV Kaichev, A Yu Gladky, AA Saraev, SS Kosolobov, OV Sherstyuk, VI Bukhtiyarov. Oscillatory Behavior in Oxidation of Propane Over Nickel Foil and Films. Topics in Catalysis (2020), 1. https://www.springerprofessional.de/en/self-sustained-oscillations-in-oxidation-of-propane-over-nickel-/17708746
Tereshin, V. Adzhiev, O. Fryazinov, F. Marrington-Reeve, A. Pasko, Automatically controlled morphing of 2D shapes with textures, SIAM Journal on Imaging Sciences, Vol. 13, No. 1, 2020, pp. 78-107. http://eprints.bournemouth.ac.uk/33366/
Nasonov Y, Safonov A, Gusev S, Akhatov I. Effect of additives on cure kinetics of pultrusion resins. Procedia Manufacturing 2020;47:920–4. https://doi.org/10.1016/j.promfg.2020.04.283
Vedernikov A, Tucci F, Safonov A, Carlone P, Gusev S, Akhatov I. Investigation on the Shape Distortions of Pultruded Profiles at Different Pulling Speed. Procedia Manufacturing 2020;47:1–5. https://doi.org/10.1016/j.promfg.2020.04.107
K. Leonov, I. Akhatov “Towards a theory of dynamics of a single cavitation bubble in a rigid micro-confinement”. International Journal of Multiphase Flow, https://doi.org/10.1016/j.ijmultiphaseflow.2020.103369
Pakhomova, C., Popov, D., Maltsev, E., Akhatov, A., Pasko, A., 2020, Software for Bioprinting, Int J Bioprint, 6(3): 279. https://doi.org/10.18063/ijb.v6i3.279
Safonov, Alexander, Michal Filippi, David Mašín, and Jiří Bruthans. 2020. “Numerical Modeling of the Evolution of Arcades and Rock Pillars.” Geomorphology, 107260. doi:10.1016/j.geomorph.2020.107260.
Vedernikov, Alexander, Alexander Safonov, Fausto Tucci, Pierpaolo Carlone, and Iskander Akhatov. “Pultruded Materials and Structures: A Review.” Journal of Composite Materials, (May 2020). doi:10.1177/0021998320922894.
Aslyamov, T. F., Iakovlev, E. S., Akhatov, I. S., Zhilyaev, P. A., Model of graphene nanobubble: Combining classical density functional and elasticity theories, The Journal of Chemical Physics, 2020, 152 (5), 054705. https://aip.scitation.org/doi/abs/10.1063/1.5138687
Nikolaev, S., Kiselev, I., Kuts, V., Optimal milling modes identification of a jet-engine blade using time-domain technique, Int J Adv Manuf Technol, 2020, 107, 1983–1992. https://doi.org/10.1007/s00170-020-05129-9
Aristov, V. V., Ilyin, O. V., and Rogozin, O. A., Kinetic multiscale scheme based on the discrete-velocity and lattice-Boltzmann methods, In: Journal of Computational Science, 2020, 40, p. 101064. doi: 10.1016/j.jocs.2019.101064.
Abaimov, S.G., Lebedev, O.V., Grishaev, V., Gilmutdinov, B.N., Akhatov, I.S., Edge flow profile under radial injection at constant pressure: Analytical predictions vs. experiment, Composit. Struct., 2020, 242, 112101, DOI 10.1016/j.compstruct.2020.112101. https://www.x-mol.com/paper/1233483778160087040
Mahato, B., Babarinde, V. O., Abaimov, S., Lomov S. V. and Akhatov I., Interface strength of glass fibres in polypropylene: dependence on the cooling rate and the degree of crystallinity, Polymer Composites, 2020, 41, 1310-1322, DOI 10.1002/pc.25456. https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.25456
Vorobyev, R.I., Sergeichev, I.V., Karabutov, A.A., E. A. Mironova, E. V. Savateeva, I. Sh. Akhatov. Application of the Optoacoustic Method to Assess the Effect of Voids on the Crack Resistance of Structural Carbon Plastics, Acoust. Phys., 2020, 66, 132–136, doi:10.1134/S1063771020020153 https://link.springer.com/article/10.1134/S1063771020020153
J.W.J. Kaiser, S. Adami, I.S. Akhatov, N.A. Adams, A semi-implicit conservative sharp-interface method for liquid-solid phase transition, International Journal of Heat and Mass Transfer, 55 (2020) 119800. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119800
Shishkovsky I., Scherbakof V. Influence of laser cycling on electro-structural features of nickel-titanium SMA fabricated by LPBF process. // Applied Surface Science, 2020. doi: 10.1016/j.apsusc.2020.145278
A. Safonov, M. Gusev, A. Saratov, A. Konstantinov, I. Sergeichev, S. Konev, S. Gusev, I. Akhatov, Modeling of cracking during pultrusion of large-size profiles, Composite Structures. 235 (2020) 111801. doi:10.1016/j.compstruct.2019.111801
Kuzminova, Y., Firsov, D., Dudin, A., Sergeev, S., Zhilyaev, A., Dyakov, A., Chupeeva, A., Alekseev, A., Martynov, D., Akhatov, I., & Evlashin, S. (2020). The effect of the parameters of the powder bed fusion process on the microstructure and mechanical properties of CrFeCoNi medium-entropy alloys. Intermetallics, 116. https://doi.org/10.1016/j.intermet.2019.106651
Podlovchenko, B. I., Maksimov, Y. M., Volkov, D. S., & Evlashin, S. A. (2020). Codeposition of Pd and Pb and electrocatalytic properties of their composite. Journal of Electroanalytical Chemistry, 858, 113787. https://doi.org/10.1016/j.jelechem.2019.113787
Yusupov, V., Churbanov, S., Churbanova, E., Bardakova, K., Antoshin, A., Evlashin, S., Timashev, P., & Minaev, N. (2020). Laser-induced Forward Transfer Hydrogel Printing : A Defined Route for Highly Controlled Process. International Journal of Bioprinting, 6(3), 1–16. https://doi.org/10.18063/ijb.v6i3.271
Bondareva, J., Luchkin, S., Dagesyan, S., Egorov, A., Evlashin, S., & Lukin, O. (2020). Covalent and noncovalent films made up of sulfonimide-based dendrimers. Applied Surface Science, 146345. https://doi.org/10.1016/j.apsusc.2020.146345
Conference proceedings
Brezhnev R.V, Maglinets Y.A, Kornilaeva A.V., Maltsev E.A. Interface Model for Spatial Objects Monitoring Task Setting E3S Web Conf. 149 01004. (2020); DOI: 10.1051/e3sconf/202014901004
Maltsev, E.A., Maglinets, Y.A., Brezhnev R.V. The objective assessment of the image quality based on the geometrical concentration E3S Web Conf., 149 (2020) 02013; DOI: 10.1051/e3sconf/202014902013
Nasonov, Y.; Safonov, A.; Gusev, S.; Akhatov, I. Mathematical simulation the kinetics of polymerization of vinyl ester resin using in pultrusion. IOP Conf. Ser. Mater. Sci. Eng. 2020, 747, 12010, doi:10.1088/1757-899X/747/1/012010.
Vedernikov, A.N.; Safonov, A.A.; Gusev, S.A.; Carlone, P.; Tucci, F.; Akhatov, I.S. Spring-in experimental evaluation of L-shaped pultruded profiles. IOP Conf. Ser. Mater. Sci. Eng. 2020, 747, 012013, doi:10.1088/1757-899X/747/1/012013.
Makarenko K., Shishkovsky I. Direct Energy Deposition of Cu-Fe System Functionally Graded Structures. // IOP Conference Series: Materials Science and Engineering (MSE), 2020, 969 (1), 012104. Doi:10.1088/1757-899X/969/1/012104
Makarenko K., Dubinin O., Shornikov P., Shishkovsky I. Specific aspects of the transitional layer forming in the aluminium bronze – stainless steel functionally graded structures after laser metal deposition. // 11th CIRP Conference on Photonic Technologies LANE 2020 , September 06-10, 2020 , Furth, Germany. // Procedia CIRP, 2020, 94: 346-351. Open access
Shishkovsky I., Kakovkina N., Scherbakof V. Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating. // 11th CIRP Conference on Photonic Technologies LANE 2020 , September 06-10, 2020 , Furth, Germany. // Procedia CIRP, 2020, 94: 217-221. Open access