2017


II.     Peer-reviewed journals

Evgeny Iakovlev, Petr Zhilyaev, Iskander Akhatov, Atomistic study of the solid state inside graphene nanobubbles, Scientific Reports 7, Article number: 17906 (2017), doi:10.1038/s41598-017-18226-9

Kuklev A.V., Zarubin S.V., Gusev M.P., Longinov A.M., Tinyakov V.V., Solidification of a Thick Slab in a Mold with Supplementary Cooling, STEEL IN TRANSLATION, 2017, Vol. 47 No. 8, pp. 13–16

Gouskov, A., Nikolaev, S., Kuts, V. et al., Analysis of displacement fields of particle shaping surface during nanoscale ductile mode cutting of brittle materials. International Journal of Advanced Manufacturing Technology (2017)

Ostanin Igor, Safonov Alexander, Oseledets Ivan. Natural Erosion of Sandstone as Shape Optimisation (2017) Scientific Reports 7 (1), Article number: 17301, doi: 10.1038/s41598-017-17777-1.

V. Yusupov, V. Zhigarkov, E. Churbanova, E. Chutko, S. Evlashin, M. Gorlenko, V. Cheptsov, N. Minaev, V. Bagratashvili, Laser-induced transfer of gel microdroplets for cell printing, Quantum Electronics,  Vol. 47, № 12, pp. 1158-1165, 2017​, https://doi.org/10.1070/QEL16512

Pavel Dyakonov, Kirill Mironovich, Sergey Svyakhovskiy, Olga Voloshina, Sarkis Dagesyan, Andrey Panchishin, Nikolay Suetin, Victor Bagratashvili, Petr Timashev, Evgeny Shirshin & Stanislav Evlashin, Carbon nanowalls as a platform for biological SERS studies, Scientific Reports 7, Article number: 13352 (2017) doi:10.1038/s41598-017-13087-8

I. Sevostianov, A.Trofimov, J. Merodio, R. Penta, R. Rodriguez-Ramos, 2017. «Connection between electrical conductivity and diffusion coefficient of a conductive porous material filled with electrolyte». International Journal of Engineering Science. DOI: 10.1016/j.ijengsci.2017.08.013

Dubinskii S.V., Safonov A.A. Composite-Friendly Approach to Certification of Advanced Materials and Fabrication Methods used in Aviation Industry. Journal of Machinery Manufacture and Reliability, 2017, 46 (5), pp. 501-506, DOI: 10.3103/S1052618817050041

Oleg Lukin,Grygoriy Dolgonos,Jerzy Leszczynski, A comprehensive test of computational approaches for evaluation of cyclodextrin complexes. Self-inclusion in monosubstituted β-cyclodextrins – a case study, Tetrahedron, Volume 73, Issue 35, 31 August 2017, Pages 5302-5306, https://doi.org/10.1016/j.tet.2017.07.030

Pogosova M.A., Eliseev A.A., Kazin P.E., Azarmi F. Synthesis, structure, luminescence, and color features of the Eu-and Cu-doped calcium apatite. // Dyes and Pigments. — 2017. — Vol. 141. — P. 209-216.

A.Trofimov, S.Abaimov, I.Akhatov, I.Sevostianov, Effect of elastic contrast between the matrix and helical fibers on the overall stiffness of a composites, International Journal of Engineering Science, 2017. DOI: 10.1016/j.ijengsci.2017.06.014

I. Shakhova, E. Mironov, F. Azarmi, A. Safonov, Thermo-electrical Properties of the Alumina Coatings Deposited by Different Thermal Spraying Technologies, Ceramics International, 43 (2017) pp. 15392-15401, https://doi.org/10.1016/j.ceramint.2017.08.080

Safonov A.A., Jones J. Physarum Computing and Topology Optimisation, International Journal of Parallel, Emergent and Distributed Systems, 2017, DOI: 10.1080/17445760.2016.1221073, Volume 32, Issue 5, Pages 448-465

B.N.Fedulov, A.A.Safonov, M.M Kantor, S.V.Lomov, Modeling Of Thermoplastic Composites Solidification And Estimation Of Residual Stresses, Composites and Nanostructures, 2017, Volume 9, N 2

V. Grishaev, C. S. Iorio, F. Dubois, A. Amirfazli, Impact of particle-laden drops: Particle distribution on the substrate, Journal of Colloid and Interface Science, Volume 490, 15 March 2017, Pages 108-118, ISSN 0021-9797, https://doi.org/10.1016/j.jcis.2016.11.038

V. Grishaev, C. S. Iorio, F. Dubois, A. Amirfazli, Impact of particle-laden drops: splashing criterion, Atomization and Sprays, 27(5): 395–406 (2017), DOI: 10.1615/AtomizSpr.2017018533

Boris Fedulov, Alexey Fedorenko, Alexander Safonov, Evgeny Lomakin Nonlinear shear behavior and failure of composite materials under plane stress conditions Acta Mechanica June 2017, Volume 228, Issue 6, pp 2033–2040, DOI: 10.1007/s00707-017-1817-4

B.N. Fedulov, A.A. Safonov, M.M. Kantor, S.V. Lomov Modelling of thermoplastic polymer failure in fiber reinforced composites Composite Structures
Volume 163, 1 March 2017, Pages 293–301 https://doi.org/10.1016/j.compstruct.2016.11.091

D. V. Tinkov, A. A. Safonov Design Optimization of Truss Bridge Structures of Composite Materials ISSN 1052-6188, Journal of Machinery Manufacture and Reliability, 2017, Vol. 46, No. 1, pp. 46–52. © Allerton Press, Inc., 2017. Published in Russian in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2017, No. 1, pp. 55–62. DOI: 10.3103/S1052618817010149

Nail A. GumerovIskander S. Akhatov Modes of self-organization of diluted bubbly liquids in acoustic fields: One-dimensional theory, The Journal of the Acoustical Society of America 141, 1190 (2017); doi: http://dx.doi.org/10.1121/1.4976099

Sergey G. Abaimov, Non-equilibrium Annealed Damage Phenomena: A Path Integral Approach, Frontiers in Physics, in Critical Phenomena in Complex Systems, 5, p. 6(1-16), 2017, DOI 10.3389/fphy.2017.00006.

V. I. Betekhtin, A. G. Kadomtsev, M. V. Narykova, M. V. Bannikov, S. G. Abaimov, I. Sh. Akhatov, T. Palin-Luc, O. B. Naimark, Experimental and theoretical study of multiscale damage-failure transition in very high cycle fatigue, Phys. Mesomech., 20 (1), pp 78–89, 2017, DOI 10.1134/S1029959917010076.

McDonald, André; Azarmi, Fardad; Balani, Kantesh; Bolelli, Giovanni; Hussain, Tanvir; Lau, Yuk-Chiu; Li, Hua; Longtin, Jon; Toma, Filofteia-Laura, Special issue featuring papers from the International Thermal Spray Conference 2016, Journal of Thermal Spray Technology, 26, No.1, pp.1-277, 2017.

IV.     Conference proceedings

F. Azarmi, E. Mironov, I. Shakhova, and A. Safonov, Effect of Microstructural Characteristics on Thermal and Electrical Properties of Thermally Sprayed Ceramic Coatings” 41st Int’l Conf & Expo on Advanced Ceramics & Composites (ICACC 2017), CESP Volume 38, Issue 2, Cocoa Beach, FL, USA Jan 22-27, 2017.

Evgeny G. Mironov, Abdul Khaleque, Fardad Azarmi, Strong Electric Field Enhancement in a Gold/Silica Bow-Tie Nano-antenna, Proceedings of the SPIE 10252, Optical Manipulation Conference, Yokohama, Japan, April 18-19, 2017.

Maria Goncharova, Fardad Azarmi, Kamal Youcef-Toumi, Iman Soltani Bozchalooi, Development of an Optimized Nanopositioning Stage for High-Speed Atomic Force Microscope, Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 90, April 25-26, 2017.

N. Tropkov, T. Petrovskaya, F. Azarmi, E. Mironov, 3D Printing Implants based on Calcium Phosphate Composites with Polymer Matrix, Shaping the Future: Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 73, April 25-26, 2017

Evgeny G. Mironov, M. Pogosova, A. Kirsanov, Fardad Azarmi, Novel Double Shaped Design for the Low-Signature AUV, Shaping the Future: Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 105, April 25-26, 2017

M. Pogosova and F. Azarmi, Crystal Structure Features and Luminescent Properties of the Copper-doped Ca-Eu Apatite, Shaping the Future: Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 112, April 25-26, 2017

Evgeny G. Mironov, Abdul Khaleque, Fardad Azarmi, Composite Gold/Silica Bow-Tie Nano-Antenna with a Strong Electric Field Enhancement, Shaping the Future: Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 103, April 25-26, 2017.

I. Shakhova, E. Mironov, A. Safonov, and F. Azarmi, The Evaluation of Mechanical-electrical Properties of Al2O3 Deposited Using APS and DGS Techniques, Shaping the Future: Big Data, Biomedicine, and Frontier Technologies, Annual Skoltech-MIT Conference, pp 104, April 25-26, 2017

Alexander Safonov, Daria Bondarchuk, Anton Saratov, Andrey Ushakov, Iskander Akhatov. Optimal Process Design for Large-Scale Pultrusion Structures, 21st International Conference on Composite Materials (ICCM 21), Xi’an, 20-25th August 2017

Pogosova M.A., Azarmi F. Crystal Structure Features and Luminescent Properties of the CopperDoped Ca-Eu Apatite. // Skoltech-MIT Conference “Shaping the Future: Big Data, Biomedicine and Frontier Technologies”. Section: Frontier Technologies. Book of Abstracts. — Russia, Moscow. — 2526 April, 2017. — P. 112.

Mironov E.G., Pogosova M., Kirsanov A., Azarmi F. Novel Double Shaped Design for the Low-Signature AUV. // Skoltech-MIT Conference “Shaping the Future: Big Data, Biomedicine and Frontier Technologies”. Section: Frontier Technologies. Book of Abstracts. — Russia, Moscow. — 25-26 April, 2017. — P. 105.

Alexander Safonov, Daria Bondarchuk, Anton Saratov, Iskander Akhatov, Optimal Process Design for Large-Scale Pultrusion Structures,  Skoltech & Mit Conference “Shaping The Future: Big Data, Biomedicine And Frontier Technologies” Skolkovo Innovation Center, Moscow, April 25th-26th, 2017

A.Trofimov, I.Sevostianov, B.Drach, 2017. «Effect of polyhedral particle shapes on overall elastic properties of particle-reinforced composites», International Summer School-Conference «Advanced problems in Mechanics», Saint Petersburg, Russia

Viktor Grishaev, Oleg V. Lebedev, Sergey G. Abaimov, Iskander S. Akhatov. Development of Standardization and Certification Methodology for Permeability Tensor Measurements in Anisotropic Porous Medium. Skoltech & Mit Conference “Shaping The Future: Big Data, Biomedicine And Frontier Technologies” Skolkovo Innovation Center, Moscow, April 25th-26th, 2017

Viktor Grishaev, Iskander S. Akhatov. Splashing of Particle-laden Drops Impacting a Substrate. Skoltech & Mit Conference “Shaping The Future: Big Data, Biomedicine And Frontier Technologies” Skolkovo Innovation Center, Moscow, April 25th-26th, 2017

Viktor Grishaev, Oleg V. Lebedev, Sergey G. Abaimov, Iskander S. Akhatov, Evaluation of Fiber Preform Permeability Tensor Considering Flow Inlet Finite Size. 21st International Conference on Composite Materials (ICCM 21), Xi’an, 20-25th August 2017